Racer Tech's Inner A-arm Pivot Sleeves. These sleeves will replace your factory inner pivot sleeves with stronger material and tighter tolerances. This full kit will replace damaged or broken inner pivot sleeves and will also provide tighter fitment for your A-arms to the chassis which greatly improves the wear life of the bolt holes in the factory chassis. The material used for the tabs on the chassis is very thin. This combined with sloppy bolt to sleeve tolerances causes’ premature wear. After some time the holes will start to "egg" out and the egging can become exponential. We use this kit on every race prep vehicle built. Sleeves are sold as a complete set for all inner pivot points. These will fit a standard RZR or RZR S and any long travel suspension system. They will work with any other suspension system using factory dimensioned inner pivot bushings as well.